Operation Manual

POWXG3007

P a g e | 9

www.varo.com

Feed the two ends of the cutting line through the

eyelets of the sleeve.

Put the sleeve around the spool and cover the

cutting line.

11 REELING OUT CUTTING LINE

Short or worn lines cut less efficiently. To

improve the trimmer’s subsequent performance,

tap the spool button lightly on the ground while

the trimmer is running at full speed. This

automatically feeds out extra cutting line. The

cutting line blade situated under the guard will

automatically trim the cutting line to the correct

length during the operation.

NOTE: Hitting hard and abrasive objects such as fences, concrete and rocks

within and around long grass may cause the cutting line to disappear. It can

easily be drawn out of the cartridge by following these simple instructions.

12 INSTRUCTIONS FOR USE

 Start the trimmer before approaching the grass to be cut.

 Cut the grass by moving the trimmer from right to left and proceed slowly, keeping trimmer

inclined about 30 degrees .High grass should be cut in layers, always beginning from the

top .The cuts should be short.

 Do not cut damp or wet grass.

 Avoid wearing the line out quickly by knocking against hard objects (stone, walls, fences

etc) .Use the edge of the guard in order to keep the trimmer at the right distance.