Instruction Manual

PROBLEM CAUSES SOLUTIONS
The
radio remote
control
does
not work
• Batteries are low • Replace batteries Fig. 22
The
radio remote
control
works
but does not
control
the
heater
• PTVTEL has not been
stored
with the heater
• Store PTVTEL read
chapter
«STORAGE OF 1
RADIO
REMOTE CONTROL WITH
1
RADIO HEATER»
Remote
control does
not
store
with heater
• Heater memory full if 4
devices
are stored
• Clear the memory
by
removing one of the
four
previously stored PTVTELs
,
see chapter «CLEARING
THE
HEATER MEMORY»
Product
does not
switch
on
• No mains voltage
• Incorrectly mounted plug
or
damaged cable.
• The remote control unit
does
not work
• Check that there is voltage
in
the power cable and try
again.
• Check that the plug is
fitted
correctly or replace the cable
.
• Check the remote control
The
heating element
does
not
turn on at any
set
power
level
• the heating element
is
damaged.
• Contact technical
support
([phone] then dial
2)
or your dealer
Power
control does
not
work
• The controller element
is
damaged.
• Contact technical
support
([phone] then dial
2)
or your dealer
TROUBLESHOOTING
19
Fig.22