Instruction Manual

CANCELLAZIONE PIR
18
In case of need, please contact our Technical Office tel. [phone]
Fig.21
Fig.19
Fig.20
CLEARING THE HEATER MEMORY CHANAEL PP
REMOVE RADIO CONTROLS AND DETECTORS
Take the radio remote control unit cod. PTVTEL:
•
By using the "+" and "-" buttons select channel PP Fig.19 and immediately after
press the button as shown in Fig. 20
• The blue LED on the heater starts flashing to confirm the cancellation operation has
been carried out Fig. 21
N.B. If deletion does not work, please repeat the operation.