Instruction Manual

Fig.7
15
Fig.6
Fig.8
Take the radio remote control unit cod. PTVTEL:
2
STORAGE OF 1 REMOTE CONTROL FOR UP TO 12 HEATERS CHANNEL13
YOU CAN STORE A MAXIMUM OF THREE RADIO REMOTE CONTROL UNITS
PLUS A PIR
OR ONLY FOUR RADIO REMOTE CONTROL UNITS
3
•
Within 10 seconds use the "+" and "-" buttons to select the channel [1-12] selected for
assignment. Example «channel 1» Fig.6
•
Immediately afterwards press the button as shown in Fig. 7.
• The blue LED on the heater goes out to confirm that the storage operation is complete.
Fig.8
N.B. If programming does not work, repeat programming
ALWAYS CARRY OUT OPERATIONS WITH ONLY ONE HEATER CONNECTED WITH
MAINS VOLTAGE.
• Repeat the operations of the previous chapter by selecting the channels of your choice
[1-12].
•
All heaters can also be assigned to the same channel.
•
It is also possible to form groups of heaters by creating heating zones.
Take the radio remote control unit cod. PTVTEL: