User guide Varjo Aero
User guide EN EN Benutzerhandbuch EN DE Mode d'emploi EN FR Guía del usuario ES EN Manuale d'uso IT EN Käyttöohje EN FI Användarguide EN SV NO placeholder EN NO ユーザーガイド EN JP 사용자 설명서 EN KO מדריך למשתמש עברית EN
NEN In the box Varjo Aero Virtual reality headset Headset adapter Power supply unit 6 power plugs EURO UK US AUS In-ear headphones KOR CHN Cleaning cloth 4
EN EN Connect the headset Varjo Aero is compatible with Windows 10 computers. 1. Headset cable: Connect to the headset adapter. 2. Headset adapter: Connect to a DisplayPort port on the graphics card and to a USB-A 3.0 / 3.1 port on the motherboard. For more detailed system requirements, see varjo.com/start/system . USB-A 3.0 / 3.
NEN Download Varjo Base Varjo Base is the software used to run your headset on a Windows 10 computer. Download Varjo Base to get started. 1. Go to varjo.com/start . 2. Select your headset model. 3. Follow the setup instructions.
EN EN Put on the headset To put on the headset, place the front of the headset on your face and pull the headband over the back of your head. You can wear most single-vision eyeglasses while using the headset. Adjust the fit and comfort of the headset when you put it on: : Rotate the back adjustment wheel to tighten the headband. : Rotate the front adjustment wheel to move the headset up or down on your head. Support the headset body with one hand while adjusting.
NEN Using the headset Action button: Interact with your Headphone connector applications Menu button: Open the Menu LED status light LED pattern Headset status White (blinking) Starting up Green (solid) Working normally Green (pulsing) Idle Green (blinking) Shutting down Orange (solid) Varjo Base not running 8
EN EN Cleaning the headset Clean the headset regularly, especially when sharing a headset with others. Headset lenses: Clean gently with optical lens wipes or a microfiber lens cloth. Headset body, cushions, nose area, and areas surrounding the lenses: Clean with non-abrasive antibacterial wipes. You can purchase additional cushions for your headset.
NEN using the headset if you have any conditions that impair your vision or mobility, are pregnant or elderly, have a heart or other serious medical condition, or suffer from seizures, migraines, or psychiatric conditions. Product and safety information Please read through and familiarize yourself with these instruction before you start to use the headset.
virtual objects clearly and comfortably. Electrical shock Overuse Do not try to disassemble, open, service, or modify the headset or power supply unit, as this can lead to electrical shock or other hazards and may damage the headset or the power supply unit. For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible. Use the headset only with the power supply unit (Adapter Technology Co., Ltd.
NEN your vision. If you switch off the automatic adjustment, you may feel discomfort when using the headset. Device temperature It is normal for the headset to feel warm to the touch while in use. The air ventilation surfaces in particular may get hot. Prolonged skin contact with a headset that is hot to the touch may cause skin discomfort or redness, or low temperature burns. If your headset feels hot to the touch or is uncomfortably warm, stop using it and allow the headset to cool down.
Radio frequencies FCC and ISED Compliance statement Component Rating Frequency Peak output power Headset 12V, 3A 2.402–2.48 GHz 1 mW This device complies with part 15 of the FCC Rules and to RSS-247 of Innovation, Science and Economic Development Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
