User`s guide

VariQuest
®
Cutout Maker 1800 User’s Guide 5-3
Maintenance Summary
Replacing the Cutting Blade
4. Press blade release button [4a] at the rear of the blade holder to expose the
blade.
CAUTION!CAUTION!
The cutter blade protrudes from the blade holder [4b] slightly even when retracted.
Take care to avoid contact with the blade. Personal injury or equipment damage
may result if the blade is touched.
5. Press the blade removal tool [5], included in maintenance kit, over the blade
and remove the blade from the blade holder. Hold a finger over the blade
release button to prevent the blade from reseating.
Note: Press the cork end of the tool over the blade.
4a
4b
5