User`s guide

3-6 VariQuest
®
Cutout Maker 1800 User’s Guide
Connecting the Cutout Maker
Connecting to a VariQuest® Design Center
Connecting the Cutout Maker
Important
Use the USB cable supplied with the Cutout Maker to connect to the VariQuest
®
Design Center or a PC. The USB cable complies with FCC “Rules and
Regulations,” Part 15 for Class A Equipment using fully-shielded six-foot data
cables. Use of longer cables or unshielded cables may increase radiation
emissions above the Class A limits. The power cord must be inserted into the
receptacle on the left side of the Cutout Maker before connecting the
communication cables.
Connecting to a VariQuest
®
Design Center
All VariQuest products can connect to the Design Center using any available USB
port. However, you can also connect devices using the following diagram.
No. Description No. Description
1
VariQuest
®
Poster Maker 3600
5
Available USB Port
2
Mouse (optional)
6
Keyboard (optional)
3
VariQuest
®
Awards Maker 400
7
VariQuest
®
Cutout Maker 1800
4
Printer
2
3
4
5
6
7
1