Instruction manual

VariQuest™ Cutout Maker 1800 Troubleshooting  6-5
Error Codes (continued)
Message Displayed Corrective Action
Job contains invalid
data and cannot be cut.
Press stop to clear
error.
Error #9
or
Error #10
1. Select a different object size in the VariQuest
TM
software on the Design Center or the
Personal Computer.
2. Press STOP button to clear error.
3. Try again.
4. If the error persists, contact your dealer.
Cut speed error. Select
a different object size
and try again.
Press stop to clear
error.
Error #11
1. Select a different object size in the VariQuest
TM
software on the Design Center or the
Personal Computer.
2. Press STOP button to clear error.
3. Try again.
4. If the error persists, contact your dealer.
Cutter head failed to
lift.
Press stop to clear
error.
Error #14
1. Press STOP button to clear error.
2. Try again.
3. If the error persists, contact your dealer.