Instruction manual

VariQuest™ Cutout Maker 1800 Maintenance  5-9
NOTE: In some cases, you may rotate the protective mat to make use of surface area that is not worn. Either end of
the mat may be inserted into the Cutout Maker.
9. Turn the machine on.
10. Ensure that the gantry returns to the home position.
8. With the leading edge of the mat secured, align the notches on the rear edge of the mat with the guide
posts on the bed. Press the mat down to secure it in position.
Rear Edge
(align notches in cutting
mat with guide posts and
press down to secure mat)
Gantry in Home Position