Instruction manual

VariQuest™ Cutout Maker 1800 Maintenance  5-7
Replacing the Cutting Mat
1. Press the stop button twice to discontinue all cutting operations and send the gantry to its home posi-
tion.
2. Remove cutting materials from cutter bed.
3. Set the power switch to 0 (OFF) to turn the machine off.
4. Slide the gantry forward and grasp the rear edge of the protective mat. Slide the mat out from between
the channels on each side of the Cutout Maker’s bed.
Stop Button
Power Switch
1 (ON)
0 (OFF)
Gantry in
Forward Position
Cutting Mat
(slide to rear)
Channel on each
side of bed