Instruction manual

5-4  Maintenance VariQuest™ Cutout Maker 1800
4. Press blade release button at the rear of the blade holder to expose the blade.
The cutter blade protrudes from the
blade holder slightly even when
retracted. Take care to avoid contact
with the blade. Personal injury or
equipment damage may result if the
blade is touched.
5. Press the blade removal tool (shown below) over the blade and remove the blade from the blade
holder. Hold a finger over the blade release button to prevent the blade from reseating.
When the button is pressed
the blade is released and
protrudes from the blade
holder as shown
Blade Release Button
Press the cork end of the
.
blade removal tool over the blade