Manualshelf

Instruction manual

ManualsBrandsVaritronics ManualsCutterVariOuest Cutout Maker 1800
31323334353637383940
VariQuest™ Cutout Maker 1800 Maintenance 5-3
3. Rotate the blade holder 90
o
towards the front of the unit to gain access to the blade.
Replacing the Cutting Blade
1. Set the power switch to 0 (OFF) to turn the machine off.
2. Open the gantry top cover, locate the blade holder/motor assembly and move it toward the middle of
the gantry tack.
Power Switch
1 (ON)
0 (OFF)
Gantry Top Cover Open
Blade Holder/Motor Assembly
(Position in center of track)
Blade Holder