Instruction manual

2-4  Cutout Maker Components and Specifications VariQuest™ Cutout Maker 1800
Control Panel
The control panel provides buttons to manually start and stop cutter operation. Pressing the GO
button starts the cutter when all the software selections are completed and the LCD display
indicates a "Ready" condition exists. Pressing the stop button retracts the cutter blade and pauses
the cutter operation. Pressing the GO button restarts the cutter operation from the point at which it
paused. Pressing the stop button a second time without pressing the GO button clears the cutter
operation, retracts the cutter blade and sends the cutter blade back to the home position.
The LCD Display shows the status of the operation underway and/or shows the error that caused
the operation to stop.
1.Load Paper
2.Press GO
3.Smooth Paper
4.Press Go
Status or
Error Messag
e
Here
Shows Status
and
Error Message
1
2
3
No. Name Description
1 Message display Lists cut job status (cutting, pause, error, etc.). Shows the options currently selected.
Displays error messages and instructions.
2 “STOP” button Pauses the cut job currently in process. Pressing “stop” while a job is paused cancels
the job.
3 “GO” button Starts the cut job selected.