User Manual

FSE103 User Guide
Attach the FSE103 to the force measurement point using the identified threaded hole situated on the top side
of the sensor.
X
Y
M5x0.8
6
THREADED HOLE
Y
X
Figure 3.2: Top view of the Variense FSE103 (measurements in mm).
3.2 Wiring the sensor
Use the included cable, or any Type A to Micro-B USB cable, to connect your FSE103 to your computer.
Y
X
Sensor
Micro USB
Z
Type B Connector
Micro USB Type B Female
Figure 3.3: Wiring diagram of the Variense FSE103.
© 2016 Variense, Inc. All rights reserved. Page 5