User Guide

Table Of Contents

FSE1001 User Guide

2 Safety

Please read the following information before using the FSE1001.

• Always respect the environmental conditions presented in the table below. The FSE1001 has not been

tested for use in extreme environments.

• Always handle the FSE1001 with care. It is made of metal and plastic and has sensitive electronic com-

ponents inside, and can be damaged if dropped, burned, punctured or crushed.

• Do not force a connector into a port. Remember to check for obstructions, make sure the connector

matches the port, and position the connector correctly in relation to the por t.

• Do not try to open the FSE1001. If opened, it will no longer be calibrated properly, and any warranty you

may have with Variense will be voided.

• Please contact us if your sensor needs repairs. Any repairs should be done by Variense, unless other-

wise speciﬁed.

Table 2.1: Operating conditions of the FSE1001

FSE1001

Minimum storage/transit temperature -25°C

Maximum storage/transit temperature 70°C

Minimum operating temperature 15°C

Maximum operating temperature 40°C

Humidity (non-condensing) 20-80% RH

Keep away from • Dust, soot or water

• Corrosive liquids or gases

• Explosive liquids or gases

• Powerful electromagnetic interference