User`s manual

VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL
68 15 April 2010 02.9690.0001 A
Figure A-9: Fixed Beam Application Assembly
a. As shown in Figure A-9, slide compression springs over optics assembly posts.
b. Turn optics ring (60
o
) so its mounting holes are in line with optics assembly posts but
does not slide over optics (CPC) lenses.
c. Using three 6-32 x 1/4" PPB screws, secure Optics Ring Plate to assembly.
Step 8. Reinstall EMI protective shields. Use care when installing EMI shield on side of ambient
temperature sensor as not to damage sensor.
Step 9. Reinstall front head cover. Be sure not to let cover edge come in contact with optics (CPC)
lenses.
Step 10. Once luminaire is reassembled, power and test.
Note: Carefully store front lens in a soft lint-free, non-abrasive covering for future use. Be sure to
keep all parts (removed with front lens) with front lens in a separate container (as not to damage lens).
6-32 x 1/4" PPB Screws (x3)
Compression Springs (x3)
Optics Ring Plate
Optics (CPC) Lenses (x7)
Optics Assembly Posts (x3)