User`s manual

VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL

56 15 April 2010 02.9690.0001 A

Troubleshooting

Error Messages

If a problem occurs during luminaire calibration, at the end of the calibration sequence the Menu

Display cycles through any applicable error message(s) until the end of the list is reached. To review

the error messages again, re-access them using the Status function.

To access error messages:

Step 1. As indicated in Figure A-1, press [ESC] to access the main menu screen.

Step 2. Press [Up] / [Down] arrows until Fixture appears. Press [Enter].

Step 3. Press [Up] / [Down] arrows to access Status. Press [Enter]. (Display will now scroll

through any error messages or display OK if no errors.)

Step 4. If an error occurs, recalibrate fixture. If error message persists, then contact an Authorized

VA RI ❋LITE

® Dealer or Service Center for support.

Note: Refer to “Error Message Reference Chart” on page 57 for Errors Message and possible causes.

Figure A-1: VLX Wash LCD Display (Menu)

ENTER

ESC

POWER

ERROR

FIXTURE

Enter Button

Arrow Keys

Escape (ESC)

(Left/Right/Up/Down)