User`s manual

MENU SYSTEM : MENU FUNCTIONS
4
02.9690.0001 A 15 April 2010 53
Quiet Fixture Mode Luminaire setup is in Quiet mode. LED output levels are decreased to keep
LED junction temperatures lower and fan noise to a minimum. Fans will still
vary in speed, but will not exceed the set (lower noise) limit.
Re-Calibrate Recalibrate Recalibrates luminaire.
Red Red LED Specifies Red (intensity) for manual control (Manual).
Reset Def Reset Defaults Resets default system configuration values.
RS232 Log RS232 Logging
WARNING: For factory use only - DO NOT use OR select, "RS232
Log - > On" unless instructed by Vari-Lite technical support to do so.
RUN TEST Run Test Indicates that a mechanism test is in progress.
SENS TST Sensor Test Indicates that a system sensor test is in progress.
Square Law Dimming Curve -
Square Law
Sets dimmer operation to Square Law dimming curve. See also, "Linear"
Start LED CAL Factory Use Only
WARNING: For factory use only - DO NOT use OR select, "Start
LED Cal".
Status Status/Error Allows scrolling through error list or displays OK if no errors.
Strobe Manual strobe
operation
Allows (Manual) operation of luminaire strobe.
Swap Swap Swaps pan/tilt action for special focus requirements.
Test Test Accesses diagnostic tests for internal mechanisms or assemblies.
Tilt Tilt Specifies tilt function for manual control (Manual) or testing (Test).
Version Version Displays current software version date and time (in two pages).
White White LED Specifies White (intensity) parameter for manual control (Manual) or testing
(Test).
Table 4-2: Menu Function Definitions (Continued)
Display Definition Purpose