User`s manual

MENU SYSTEM : MENU FUNCTIONS
4
02.9690.0001 A 15 April 2010 51
Menu Function Definitions
For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Table 4-2: Menu Function Definitions
Display Definition Purpose
10 Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
30 Sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5 Min 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address Address Accesses option for setting luminaire DMX starting address.
All Seq All Test
Sequences
Tests all internal mechanisms in sequence for X steps.
Auto Automatic Opera-
tion
When set to "Auto", menu display will automatically orient itself is relation to
fixture’s hanging or sitting position (up or down).
Beam Sprdr Beam Spreader
Mechanism
Specifies beam spread function for manual control (Manual or Test).
Blue Blue LED Specifies Blue color (intensity) for manual control (Manual).
CAL LEDs Calibrates LEDs To start LED calibration or to set LEDs to specific factory calibration level
Channel XXX DMX Channel Specifies DMX channel for display of current data value.
CMD Lock Command Lock Selects whether to set Command Lock - to lock-out access to various settings
from the console using the Control Channel.
Configure System
Configuration
Accesses options for pan/tilt operation, LED Setup, dimmer operational set-
tings, and Menu Display defaults.
Constant Fans Fixture Mode Luminaire setup is in Constant Fans mode. This setting sets fans to maximum
speed and will keep them operating at full, regardless of LED junction temper-
atures.
Data DMX Data Accesses option for setting DMX address channel.
Dim Curve Dimmer Operation Specifies dimmer to operate in Curve or Linear Mode
Dimmer Dimmer Specifies dimmer mechanism for manual control (Manual).
Disable Disable Disables a function.
Display Display Accesses options for Menu Display illumination time and orientation.
Display Display Selects and sets menu display orientation of arrow direction. (Currently Dis-
abled)
Display Display Selects and sets menu display orientation of arrow direction. (Currently Dis-
abled)
Disp Tilt Menu orientation
control
Sets the orientation of the menu display to match the luminaire orientation,
(Auto) automatic display orientation, standing (Up) or hanging (Down).
DMX DMX Accesses options for DMX system settings.
Download Download Initiates download of luminaire software.
Enable Enable Enables a function.
Encoder Encoder Accesses pan/tilt encoders for diagnostic testing.
FAIL Test Fail Indicates that a test has failed.
Fixt Hrs Fixture Hours Displays total number of hours luminaire has been powered on.