User`s manual

INSTALLATION : ADDRESSING

02.9690.0001 A 15 April 2010 19

Addressing

Program Starting Address

The address setting for DMX console controlled systems is entered using the Menu Display (refer to

“Menu Operation” on page 44). The luminaire retains the DMX address even when power is removed.

Note: Refer to your console operating instructions for specific information regarding its addressing

requirements.

Program a DMX starting address:

Step 1. Press [ESC] to access the main menu of the luminaire.

Step 2. Press [Up] / [Down] arrows until Address appears. Press [Enter].

Step 3. Press [Up] / [Down] arrows to enter starting address.

Step 4. Press [Enter] to set.