User`s manual

INSTALLATION : INSTALLATION PROCEDURES
2
02.9690.0001 A 15 April 2010 15
Step 3. While pulling up on locking mechanism release, fit keyed holes onto raised mounting
buttons at bottom of enclosure. Slide forward and release locking mechanism to lock in
place. Ensure brackets are locked securely. (Always face brackets in same direction as
shown.)
WARNING: Ensure that the bracket locking mechanism is fully seated after the bracket is installed
on the luminaire.
Figure 2-4: Installing Brackets on Luminaire Enclosure
Mounting
Press up to
Fit over buttons and
slide forward to lock
Locking
Face brackets in
same direction for
all configurations
Keyed
Locked
install or release
Raised Mounting
Mechanism
Example Truss Hook
(not included)
Buttons (4 each)
Locking
Mechanism
Bracket
Hole