VARI❋LITE® is a trademark owned by Genlyte Thomas Group LLC and is registered in the United States and other countries.
FOREWORD How To Obtain Warranty Service A copy of the Vari-Lite Limited Warranty was included in the shipping package for this VARI❋LITE® product. To obtain warranty service, please contact customer service at 1-877-VARI-LITE (1-877-827-4548), +1-214-647-7880, or entertainment.service@philips.com and request a Return Material Authorization (RMA) for warranty service.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Compliance Notice FCC This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment.
FOREWORD Safety Notice It is extremely important to read ALL safety information and instructions provided in this manual and any accompanying documentation before installing and operating the products described herein. Heed all cautions and warnings during installation and use of this product. Safety symbols used throughout this manual are as follows: CAUTION advising of potential damage to product. WARNING advising of potential injury or death to persons.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL WARNING: INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST EXCESSIVE EXPOSURE TO UV RADIATION 1. Many VARI❋LITE® luminaires use a lamp that produces UV radiation. DO NOT look directly at lamp. 2. It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired. For example, by cracks or deep scratches.
FOREWORD Sicherheitshinweise Es ist äußerst wichtig, ALLE Sicherheitsinformationen und -hinweise in diesem Handbuch und dem beiliegenden Informationsmaterial zu lesen, bevor Sie die hierin beschriebenen Produkte installieren bzw. bedienen. Halten Sie bei der Installation und dem Einsatz dieses Produkts alle Warnhinweise und Vorsichtsmaßnahmen ein. Folgende Sicherheitssymbole werden in diesem Handbuch verwendet: VORSICHT - weist auf möglichen Produktschaden hin.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL WARNUNG: HINWEISE ZUM SCHUTZ GEGEN ÜBERHÖHTE UV-STRAHLUNG 1. Viele VARI❋LITE®-Scheinwerfer verwenden die Lampentyp, der UV-Strahlen abgibt. SCHAUEN SIE NICHT direkt in die Lampe. 2. Es ist gefährlich, Leuchten ohne Linsen oder Blenden zu bedienen. Blenden, Linsen oder Ultraviolettschirme müssen ausgetauscht werden, sofern deren Schutzwirkung durch sichtbare Beschädigung (z. B. Sprünge oder Schrammen) eingeschränkt ist.
FOREWORD Notes de sécurité Avant de procéder à l’installation des produits décrits dans ce guide et de les mettre en marche, il est extrêmement important de lire TOUS les renseignements et TOUTES les directives de sécurité contenues dans ce guide ainsi que toute documentation jointe. Tenir compte de tous les avertissements et suivre toutes les précautions pendant l’installation et l’utilisation de cet appareil.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL AVERTISSEMENT: DIRECTIVES POUR SE PROTÉGER CONTRE UNE EXPOSITION EXCESSIVE AUX RAYONS UV 1. Plusieurs luminaires VARI❋LITE® utilisent une lampe qui produit des rayons UV. NE PAS fixer son regard sur la lampe. 2. L’utilisation des luminaires sans lentille ou blindage pose des risques.
FOREWORD Aviso sobre Seguridad Es muy importante leer TODA la información e instrucciones sobre seguridad que se indica en este manual así como en los documentos adjuntos antes de instalar y operar los productos descritos. Se debe prestar atención a todos los avisos y advertencias durante la instalación y uso de este producto. Los símbolos de seguridad usados en este manual son los siguientes: CUIDADO, indica posibles daños al producto. ADVERTENCIA, indica posibles lesiones o muerte a las personas.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL ADVERTENCIA: INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA LA EXPOSICIÓN EXCESIVA DE RADIACIÓN ULTRA VIOLETA 1. Muchas luminarias VARI❋LITE® usan un tipo de lámpara que produce radiación UV. NO mire directamente a la lámpara. 2. Es peligroso operar luminarias sin lentes o protectores. Debe cambiar los protectores, lentes o pantallas ultravioletas si se aprecia que han sido dañadas, y que su efectividad pudiera estar deteriorada.
FOREWORD 02.96 90.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL xii 1 5 Ap ril 2 010 02 .9 690 .
TABLE OF CONTENTS Table of Contents Introduction About This Manual ................................................................................................................... Additional Documentation........................................................................................................ Text Conventions ...................................................................................................................... Customer Service ..............................................
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Intensity Time Control ...................................................................................................... 28 Beam Control..................................................................................................................... 28 Strobe................................................................................................................................. 28 Beam Spreader..................................................
INTRODUCTION : ABOUT THIS MANUAL Introduction About This Manual This manual provides necessary information regarding safety, installation, operation and routine maintenance for the VARI❋LITE® VLX™ Wash Luminaire. Familiarizing yourself with this information will help you to get the most out of your luminaire. WARNING: It is important to read ALL accompanying safety and installation instructions to avoid damage to the product and potential injury to yourself or others.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Text Conventions The following styles and meanings are used throughout this manual: Style Meaning [Button] Front panel button. Example: Press [Enter] or [ESC] (Escape). [Up] / [Down] / [Left] / [Right] Arrows Press either [Up] or [Down] or [Left] or [Right] arrow button at Menu Display. MENU LCD Menu Display read-out. Example: Press [Up] / [Down] / [Left] / [Right] arrows until LAMP appears.
CHAPTER 1. Description This chapter contains descriptions of luminaire features and components, along with a list of accessories that are available. • Features • Components 02.96 90.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Features Standard Features All VLX™ Wash Luminaires have the following standard features: • Seven, 120-watt replaceable custom RGBW chipsets. Each chip set contains high density red, green, blue, and white LED emitters. • Manufacturer rated life (LED chip sets), in excess of 10,000 hours (at full RGBW). • Light output of approximately 14,000 lumens (white light).
DESCRIPTION : COMPONENTS 1 Components Included Items The following illustration shows all items included with the luminaire: Included Items VLXTM Wash Luminaire CD ROM (User’s Manual) Unpack & Quick Start Sheet Warranty Card Vari-Lite Customer Service Product Support Sheet Product Registration Card Neutrik PowerCon® AC Input Connector* Vari-Lite QA Certificate Mounting Brackets VLXTM Wash Luminaire *Unit supplied with AC input connector only.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Luminaire Overview The following illustration shows the external luminaire components and controls. Head Assembly Houses light source lens and LED PCB assemblies. Backcap Assembly Provides access to light source and LED cooling assemblies. Front Lens Assembly Yoke Assembly Houses Master Control Board (MCB) and power supply. Upper Enclosure Assembly Houses LED power supply connections and menu display.
DESCRIPTION : COMPONENTS 1 Luminaire Overview (continued) Upper Enclosure Menu Status LEDs Power State, Data Transmit, Data Receive, Data Error LCD Display Displays all Data and Luminaire Settings POWER TX RX ENTER ERROR ESC Escape (ESC) To Exit or Go to Previous Menu Item Enter Button Arrow Keys (Left/Right/Up/Down) To Select or Change a Setting or Data Value To Menu Navigate Menu Options and make Data Selections Upper Enclosure Connections DMX Input Connection to DMX Controls DMX Through AC
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Notes 8 1 5 Ap ril 2 010 02 .9 690 .
CHAPTER 2. Installation This chapter contains instructions for installation of the luminaire. It includes connecting power and data, along with instructions for powering up the luminaire for the first time and addressing it within your system. • Power and Data Cabling Requirements • Installation Procedures • Powering Up • Addressing WARNING: DO NOT connect or disconnect energized power cable at fixture (under load).
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Power and Data Cabling Requirements AC Power WARNING: DO NOT connect to three-phase Delta service in countries with 240 volt power. WARNING: DO NOT connect or disconnect energized power cable at fixture (under load). Turn off circuit breaker (or completely de-energize circuit) before connecting or disconnecting power cable at fixture. Power is only removed from the fixture by disconnecting power cable from source or turning off source circuit breaker.
INSTALLATION : POWER AND DATA CABLING REQUIREMENTS 2 Current vs. Voltage The following tables provide the luminaire’s current draw at specific voltages. Table 2-1: VLX Wash Luminaire - Current vs. Voltage* Voltage (VAC) @ 60Hz Current (A) 100 9.0 110 8.2 120 7.5 130 6.9 140 6.4 150 6.0 160 5.6 170 5.3 180 5.0 190 4.7 200 4.5 210 4.3 220 4.1 230 3.9 240 3.8 *Currents given are worst case with all motors sequencing. 02.96 90.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Data Cables The VLX™ Wash Luminaire is equipped with two, 5-pin XLR connectors for DATA IN and DATA THRU (out) applications. DATA IN requires a 5-pin, female XLR connector and DATA THRU requires a 5-pin, male XLR connector. When purchasing or constructing data cables, it is important that not only the correct cable type be used, but also quality cable to ensure a reliable DMX512 system.
2 INSTALLATION : POWER AND DATA CABLING REQUIREMENTS Recommended Cable Types/Manufacturers These are only a few of the suitable cable types. Any quality EIA485, twisted pair, 120 ohm, shielded cable will also work.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Installation Procedures Hanging the Luminaire The VLX™ Wash Luminaire can be hung horizontally or vertically from any structure designed to work with the type of load created by this moving luminaire. Two mounting bracket assemblies (provided) are used to attach truss hooks or other mounting hardware as required. Many compatible truss hooks are available from different manufacturers for your particular needs.
2 INSTALLATION : INSTALLATION PROCEDURES Step 3. While pulling up on locking mechanism release, fit keyed holes onto raised mounting buttons at bottom of enclosure. Slide forward and release locking mechanism to lock in place. Ensure brackets are locked securely. (Always face brackets in same direction as shown.) WARNING: Ensure that the bracket locking mechanism is fully seated after the bracket is installed on the luminaire.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Installing in Truss: Step 1. Using two people, lift luminaire into mounting position. Step 2. Secure in place with truss hook. Ensure truss hook hardware that locks hook in place (e.g. wing bolt) is properly tightened and that luminaire is fully supported. Step 3. Attach safety cable (as required) as follows: a. Connect one end of cable to luminaire handle. b. Loop at least once around truss/pipe and attach other end of cable to other handle. Step 4.
INSTALLATION : INSTALLATION PROCEDURES 2 Floor Mounting the Luminaire The luminaire enclosure is sufficient to stabilize the luminaire in a floor installation, provided that the mounting surface is flat and sturdy. Also, the area around the luminaire must be free of debris and moisture. Connecting Data and Power A maximum of 32 luminaires may be connected in any one DMX data link. Note: This maximum limit applies to the luminaire "daisy chain" only.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Powering Up Power Up and Configuration Procedure When AC power is initially applied, the luminaire immediately begins a calibration sequence that steps it through pan and tilt movements. The beam mechanism also moves through a full range of motion.
INSTALLATION : ADDRESSING 2 Addressing Program Starting Address The address setting for DMX console controlled systems is entered using the Menu Display (refer to “Menu Operation” on page 44). The luminaire retains the DMX address even when power is removed. Note: Refer to your console operating instructions for specific information regarding its addressing requirements. Program a DMX starting address: Step 1. Press [ESC] to access the main menu of the luminaire. Step 2.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Notes 20 1 5 Ap ril 2 010 02 .9 690 .
CHAPTER 3. Operation This chapter contains instructions for operating the luminaire using DMX control and for updating the internal software. For Menu options and detailed information, see “Menu Operation” on page 44. • DMX Operation • DMX Mapping • Luminaire Timing • Updating Software 02.96 90.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL DMX Operation Channel Mapping These tables assume a DMX start address of 1. When a different starting address is used, this address becomes channel 1 function and other functions follow in sequence.
OPERATION : DMX OPERATION 3 Table 3-1: VLX™ Wash Luminaire Mapping Mode 1 22 Beam Time 0 - 255 0 - 100% 255 Allows for luminaire timing of zoom. Profile should default to DMX 255 for smoothest console fade times. Used to set different modes, parameters, and functions of the VLX Wash. Set control channel value for desired action. Hold value for at least 3 seconds. Set control channel value to 0 without any scaling.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Control Channel Functions Used to set different modes, parameters, and functions of the VLX™ Wash Luminaire via the control console. Set control channel value for desired action. Hold value for at least 3 seconds. Set control channel value to 0 without any scaling. Discrete values must be used; not manual controls such as faders or encoders (see chart below for values). To use control channel functions: Step 1. Select an action to be sent. Step 2.
OPERATION : DMX OPERATION 3 VLX Operational Modes (from Control Channel Settings): Quiet Mode Quite Mode lowers LED output levels for low noise operation. In Quiet Mode, LED junction temperatures are lowered and fan noise set to minimum. Fans will still vary in speed, but will not exceed the set (lower noise) limit. Level Light Mode Level Light Mode maintains a reduced LED output to keep various fixtures from operating at different levels depending upon thermal situations.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL DMX Mapping Color & Intensity Control The luminaire’s color system is composed of a color mixing seven 120-watt RGBW LEDs. The following sections describe these components. Color Mixing All color mixing is accomplished via the luminaire’s seven 120-watt RGBW LEDs using 16-bit control.
OPERATION : DMX MAPPING 3 . Table 3-6: DMX Map for Color Mixing - White LEDs DMX Channel % Value DMX Value Default - These values are recommended console default values Action 0 - 100 0 - 65535 0 16-Bit Control of White LEDs from 0 to Full 13 (High Byte) 14 (Low Byte) Color Time Control Table 3-7: DMX Map for Color Time Control DMX Channel 21 % Value 0 - 100 DMX Value Default - These values are recommended console default values Action 255 Allows for luminaire timing of color mixing.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Intensity Time Control Table 3-9: DMX Map for Intensity Time Control DMX Channel 19 % Value 0 - 100 DMX Value Default - These values are recommended console default values Action 255 Allows for luminaire timing of intensity. Profile should default to DMX 255 for smoothest console fade times.
OPERATION : DMX MAPPING 3 Beam Time Table 3-12: DMX Map for Beam Timing DMX Channel 22 02.96 90.000 1 A % Value 0 - 100 DMX Value Default - These values are recommended console default values Action 255 Allows for luminaire timing of zoom and intensity.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Luminaire Movement Luminaire Pan 16-bit control of luminaire pan operation. Table 3-13: DMX Map for Luminaire Pan Operation DMX Channel % Value DMX Value Default - These values are recommended console default values Action 0 - 100 0 - 65535 32768 16-bit control of Pan - 540 degrees of movement. 3 (High Byte) 4 (Low Byte) Luminaire Tilt 16-bit control of luminaire tilt operation.
OPERATION : LUMINAIRE TIMING 3 Luminaire Timing Timing Channel Information Timing channel control improves the timed moves of certain groups of parameters. We provide up to four timing channels, one for focus (Pan and Tilt), one for color parameters, one for beam parameters, and one for luminaire intensity. Types of timing control: • Timing Control Channel: the luminaire uses its timing channel value to calculate a smooth continuous movement for a given time and transition.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Note: The particular storing syntax for your console, as well as instructions on how to write part cues, can be found in the operation manual for that console. To use these channels, you must: Step 1. Create the cue, including color, focus, intensity, etc. as required. Step 2. Decide which fixtures and which parameter groups will use timing channels. Step 3.
OPERATION : LUMINAIRE TIMING 3 Timing channels can be set in either % or 0-255 (DMX) modes, with the following values assigned: Table 3-17: Timing Channels Map % Value 1 2 = Seconds 0 Full Speed 1 0.2 2 0.4 3 0.6 4 0.8 5 1 6 1.2 7 1.4 3 8 1.6 9 1.8 4 10 2 5 6 11 2.2 12 2.4 13 2.6 14 2.8 15 3 16 3.2 17 3.4 7 18 3.6 19 3.8 8 20 4 21 4.2 22 4.4 23 4.6 24 4.8 9 10 11 12 13 14 15 02.96 90.000 1 A DMX 25 5 26 5.2 27 5.4 28 5.6 29 5.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Table 3-17: Timing Channels Map (Continued) % Value 16 17 18 19 20 21 = Seconds 39 7.8 40 8 41 8.2 42 8.4 43 8.6 44 8.8 45 9 46 9.2 47 9.4 48 9.6 49 9.8 50 10 51 10.2 52 10.4 53 10.
OPERATION : LUMINAIRE TIMING 3 Table 3-17: Timing Channels Map (Continued) % Value DMX 81 22 32 82 22 83 23 84 23 85 23 86 24 87 24 88 25 89 25 90 25 33 34 35 91 26 36 92 26 93 27 37 94 27 95 27 38 39 40 41 42 96 28 97 28 98 29 99 29 100 29 101 30 102 30 103 30 104 31 105 31 106 32 107 32 108 32 109 33 43 110 33 111 34 44 112 34 113 34 45 46 47 48 02.96 90.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Table 3-17: Timing Channels Map (Continued) % Value 49 = Seconds 123 38 124 39 125 39 126 39 127 40 50 128 40 129 41 51 130 41 131 41 52 53 54 132 42 133 42 134 43 135 43 136 43 137 44 138 44 139 45 140 45 141 45 142 46 56 143 46 144 47 57 145 47 146 47 55 58 59 60 61 147 48 148 48 149 49 150 49 151 49 152 50 153 50 154 50 155 51 156 51 157 52 158 52 159 52 160 53 63 161
OPERATION : LUMINAIRE TIMING 3 Table 3-17: Timing Channels Map (Continued) % Value DMX 165 55 65 166 55 167 56 168 56 169 56 170 57 171 57 172 58 173 58 174 58 66 67 68 175 59 176 59 177 59 178 60 70 179 60 180 65 71 181 65 182 65 69 72 73 74 75 183 70 184 70 185 75 186 75 187 75 188 80 189 80 190 85 191 85 192 85 193 90 76 194 90 195 95 77 196 95 197 95 78 79 80 81 02.96 90.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Table 3-17: Timing Channels Map (Continued) % Value 82 = Seconds 207 130 208 140 209 140 210 140 211 150 83 212 150 213 160 84 214 160 215 160 85 86 87 88 89 216 170 217 170 218 180 219 180 220 180 221 190 222 190 223 200 224 200 225 200 226 210 227 210 228 210 229 220 90 230 220 231 230 91 232 230 233 230 92 93 94 234 240 235 240 236 250 237 250 238 250 239 260 240 260 241 270 2
OPERATION : LUMINAIRE TIMING 3 Table 3-17: Timing Channels Map (Continued) % Value DMX 249 300 98 250 300 251 310 252 310 253 310 254 310 255 Follows Cue Data 99 100 02.96 90.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Updating Software USB Download and Programming To download files with a PC equipped with a Universal Serial Bus (USB) port, you need the VARI❋LITE® USB Luminaire Programming Kit (28.8500.0054). The USB Luminaire Programming Kit can be ordered directly from your Authorized VARI❋LITE® Dealer. The VARI❋LITE® USB Luminaire Programming Kit (28.8500.0054) includes: • VARI❋LITE® USB Upload Cable (25.9600.0001) • USB Luminaire Programming Kit CD (87.8500.
OPERATION : UPDATING SOFTWARE Lists specific versions of downloaded software (on PC) Click to download specific software version to connected luminaire(s) 3 Device Connection Status and USB Downloader Controls Click logo to go to Vari-Lite web site (internet connection required) Download History Will show current progress of download Figure 3-1: VL Download Program Window Transferring Software From Luminaire to Luminaire It is possible to transfer specific software versions between luminaires.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL A termination connector is used in this process. Refer to page 13 for more information regarding the construction of this connector. Master luminaire containing software version to download Luminaire 1 requiring update Luminaire 2 requiring update Data Thru Data Thru Termination Connector Figure 3-2: Software Transfer Setup Transfer Procedure This procedure is used to transfer software versions between luminaires. Step 1.
CHAPTER 4. Menu System This chapter contains instructions for operating the luminaire using the Menu Display feature. For DMX operation and detailed information, see “DMX Operation” on page 22. • Menu Operation • Menu Functions 02.96 90.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Menu Operation What Is the Menu System? The menu system is a programmable set of commands used to configure, address, operate, and test the luminaire. The menu system is controlled at the Menu Display available at the enclosure input panel. Menu Display Enclosure Input Panel Figure 4-1: Menu Display Location Controls Operation The menu system is controlled by an ENTER, ESC (Escape), and four Arrow (YUVZ) buttons.
MENU SYSTEM : MENU OPERATION 4 Table 1-1: Menu Control Buttons Button Description Action Up Arrow Menu Navigation / Data Selection Down Arrow Menu Navigation / Data Selection Right Arrow Menu Navigation / Data Selection Left Arrow Menu Navigation / Data Selection Enter Button To Select or Change a Setting or Data Value Escape Button Used to Access Main Menu Parameters, Exit, or Return to Previous Menu Item ENTER ESC [ESC] button.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL To enter the menu system, first press [ESC]. The functions displayed will be 1st level functions. Scroll through the 1st level functions by pressing [Up] / [Down] arrows. Once the desired function appears in the display, press [Enter]. You are now at the 2nd level. Once again, press the [Up] / [Down] arrows to scroll through 2nd level functions. Press [Enter] to access 3rd level functions and so forth.
MENU SYSTEM : MENU FUNCTIONS 4 Menu Functions Menu System Overview The following is a graphic representation of the entire VLX™ Wash Luminaire menu system.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Menu System Function Chart The following is a detailed look at the internal menu system.
MENU SYSTEM : MENU FUNCTIONS 4 Table 4-1: VLX Wash Menu System Chart 1st Level DMX DMX Data 2nd Level 3rd Level 4th Level DATA Chan XXX DMX Channel XXXX Value 0 - 255 Pan/Tilt Pan and Tilt Options Swap Swap Pan & Tilt ON Inv Pan Invert Pan ON 5thLevel OFF OFF Inv Tilt Invert Tilt ON OFF Fixture Manual Manual Commands (Disabled when DMX Present.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Table 4-1: VLX Wash Menu System Chart 1st Level Test Fixture operational tests - Press [ESC] to stop tests 2nd Level 3rd Level All Seq Selects fixture to run and sequence through all available tests RUN TEST Pan/Tilt Selects fixture to run Pan/Tilt operational test RUN TEST Pan Selects fixture to run Pan operational test RUN TEST Tilt Selects fixture to run Tilt operational test RUN TEST Strobe Selects fixture to run Strobe operational test RUN TES
MENU SYSTEM : MENU FUNCTIONS 4 Menu Function Definitions For easy reference, each possible menu item is listed alphabetically in the first column by its display abbreviation. The second column follows with a definition of the abbreviation and then a third column provides an explanation of its purpose and function. Table 4-2: Menu Function Definitions Display Definition Purpose 10 Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Table 4-2: Menu Function Definitions (Continued) 52 Display Definition Fixture Fixture Purpose Accesses luminaire information such as serial number, software version, and total operation hours. Also accesses recalibration and download options. Green Green LED Int Level Intensity Level Inv Pan Invert Pan Reverses pan action for special focus requirements. Inv Tilt Invert Tilt Reverses tilt action for special focus requirements.
MENU SYSTEM : MENU FUNCTIONS 4 Table 4-2: Menu Function Definitions (Continued) Display Definition Quiet Fixture Mode Re-Calibrate Recalibrate Red Red LED Reset Def Reset Defaults RS232 Log RS232 Logging Purpose Luminaire setup is in Quiet mode. LED output levels are decreased to keep LED junction temperatures lower and fan noise to a minimum. Fans will still vary in speed, but will not exceed the set (lower noise) limit. Recalibrates luminaire.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Notes 54 1 5 Ap ril 2 010 02 .9 690 .
APPENDIX A. Troubleshooting and Maintenance This appendix provides instructions for troubleshooting and routine maintenance which may be necessary during the life of the luminaire. • Troubleshooting • Routine Maintenance WARNING: All routine maintenance procedures are to be performed with power completely removed from the luminaire. Never remove protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves when servicing the fixture.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Troubleshooting Error Messages If a problem occurs during luminaire calibration, at the end of the calibration sequence the Menu Display cycles through any applicable error message(s) until the end of the list is reached. To review the error messages again, re-access them using the Status function. To access error messages: Step 1. As indicated in Figure A-1, press [ESC] to access the main menu screen. Step 2.
TROUBLESHOOTING AND MAINTENANCE A Table A-1: Error Message Reference Chart Error Message Definition Possible Causes Error X of X No LED Upload Board Number X Firmware version in LED Driver Board did not match firmware version in MCB. MCB will try to upload correct version of firmware three times. If, after the third try the versions do not match, the error will be displayed.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Troubleshooting Guide If a problem is suspected, first try recalibrating the luminaire to prompt an error message. The chart below provides possible causes and remedies for various error messages and/or symptoms. WARNING: All service and maintenance (including troubleshooting), other than described herein should be performed by an Authorized VARI❋LITE® Dealer or Service Center.
TROUBLESHOOTING AND MAINTENANCE A Table A-2: Troubleshooting Chart (Continued) Message n/a Description Symptom Possible Cause/Remedy Colors (light output) not matching from luminaire to luminaire Color output not matching other VLX Wash fixtures operating at same control settings. Calibration turned On or Off... - Check fixture calibration setting. Make sure calibration is set to same setting (On or Off) as other fixtures. - Check dimming curve setting.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Routine Maintenance Introduction Being a solid-state fixture, and unlike most automated arc or tungsten fixtures, the VLX™ Wash Luminaire requires very little routine maintenance by the user. This section covers all the parts or assemblies that can be removed, cleaned, and checked by the user. Any additional maintenance or service should only be completed by an Authorized VARI❋LITE® Service Center.
TROUBLESHOOTING AND MAINTENANCE A Front Lens Removal and Cleaning Tools: • #2 Phillips screwdriver • Slotted Screwdriver • Refer to the list of cleaning materials in “Special Cleaning and Care Instructions” on page 60 WARNING: Ensure that power is completely removed from luminaire before attempting any work. Always wear eye protection and proper gloves when performing this procedure. To clean from lens assembly and optics: Step 1. Remove power from luminaire and allow unit to completely cool.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Step 4. Gently slide front head cover over optic assembly and set aside. Step 5. Optional - only if equipped with long (old-style) EM shields, remove protective EMI shields from around optics assembly as shown in Figure A-3 as follows: WARNING: On one EMI shield, it is imperative to identify the ambient temperature sensor that protrudes through the EMI protective shield (it is on the opposite side where the front cover safety tether connects.
TROUBLESHOOTING AND MAINTENANCE A 6-32 x 1/4" PPB Screws (x3) Front Lens Ring Zoom Slide Standoffs (x3) Array Lens Compression Springs (x3) Optics Ring Plate Optics (CPC) Lenses Figure A-4: Front Lens Removal Note: Before proceeding, please note orientation of both front lens ring and front lens assembly. They must be mounted in their original orientation/position for the front head cover to reinstall properly. a. Remove three screws securing array lens and lens ring. Set components aside. b.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Step 8. Once cleaning is complete, reassemble by performing Steps 6 through 2 in reverse order. Be sure to orient front lens as shown in Figure A-5. WARNING: Front Lens Assembly must be mounted in orientation show. If installed incorrectly, luminaire performance will be affected.
TROUBLESHOOTING AND MAINTENANCE A Beam Spreader Removal for Fixed Beam Applications Tools: • #2 Phillips screwdriver • Slotted screwdriver WARNING: Ensure that power is completely removed from luminaire before attempting any work. Always wear eye protection and proper gloves when performing this procedure. To remove beam spreader assembly for fixed beam applications: Step 1. Remove power from luminaire and allow unit to completely cool. Step 2.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Step 5. Optional - only if equipped with long (old-style) EM shields, remove protective EMI shields from around optics assembly as shown in Figure A-3 as follows: WARNING: On one EMI shield, it is imperative to identify the ambient temperature sensor that protrudes through the EMI protective shield (it is on the opposite side where the front cover safety tether connects. When this shield is removed, great care has to employed not to damage the sensor. a.
TROUBLESHOOTING AND MAINTENANCE Step A 6. At head assembly, as shown in Figure A-4, remove front lens assembly as follows: 6-32 x 1/4" PPB Screws (x3) Front Lens Ring Zoom Slide Standoffs (x3) Array Lens Compression Springs (x3) Optics Ring Plate Figure A-8: Front Lens Removal a. Remove three screws securing array lens and lens ring. Set components aside. b. Note zoom motor wiring and routing. Disconnect wiring from zoom motors. c. At front lens, loosen and remove and remove three stand-offs.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL 6-32 x 1/4" PPB Screws (x3) Optics Ring Plate Compression Springs (x3) Optics (CPC) Lenses (x7) Optics Assembly Posts (x3) Figure A-9: Fixed Beam Application Assembly a. As shown in Figure A-9, slide compression springs over optics assembly posts. b. Turn optics ring (60o) so its mounting holes are in line with optics assembly posts but does not slide over optics (CPC) lenses. c. Using three 6-32 x 1/4" PPB screws, secure Optics Ring Plate to assembly.
TROUBLESHOOTING AND MAINTENANCE A Cooling System Heatsink Cleaning Procedure Tools: • #2 Phillips Screwdriver • Moisture and oil-free, compressed air duster • Soft bristle, 1" Mottler brush WARNING: Ensure that power is completely removed from luminaire before attempting any work. Always wear eye protection and proper gloves when performing this procedure. To clean the cooling system heatsinks: Step 1. Remove power from luminaire and allow unit to completely cool. Step 2.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Step 4. Gently slide front head cover over optic assembly and set aside. Front Head Cover Front Cover Latch (one on each side of cover) Front Head Cover Safety Tether Figure A-11: Front Head Cover Removal Step 5. Disengage tilt lock and rotate luminaire head 90-degrees and re-engage tilt lock (optional). Step 6. At inside of rear head cover, remove eight #6 x 1/4" PPZ Plastic Threading Screws and remove rear head cover and set aside.
TROUBLESHOOTING AND MAINTENANCE Step A 7. As indicated in Figure A-12, at LED cooling assembly heatsinks, run Mottler brush gently through and in the direction of the heatsink fins from top to bottom so debris will fall down and away from assembly. Care should be taken as not to damage heatsinks.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Notes 72 1 5 Ap ril 2 010 02 .9 690 .
APPENDIX B. Technical Specifications VLX™ Wash Luminaire PROGRAMMABLE FUNCTIONS Color Mixing System Seven, custom replaceable 120 watt RGBW LED chipsets. Each chipset contains high density red, green, blue, and white LED emitters. Zoom Optics Patented optical zoom system with continuously variable field angle from approximately 23° to 58°. Zoom module is easily removable for fixed field angle of 22°.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL PHOTOMETRIC Zoom LED Mode Field Angle Lumens Narrow RGBW 23o 12,200 Wide RGBW 58o 10,900 Without Lens Array RGBW 22o 13,900 OPERATIONAL Power Requirements Standard AC power distribution from 100-240 VAC, 50/60 Hz. The fixture requires up to 10A depending on the AC supply voltage. Operational Temperature -20° to 122°F (-29° to 50°C) Cooling Variable forced air cooling.
TECHNICAL SPECIFICATIONS B Dimensions 21.50 in 546.1 mm 17.17 in 436.1 mm 17.47 in 443.8 mm 9.42 in 239.2 mm 9.38 in 238.1 mm 6.28 in 159.6 mm 12.53 in 318.4 mm 18.21 in 462.5 mm 10.00 in 254.0 mm 16.58 in 421.2 mm 10.00 in 254.0 mm 18.16 in 461.2 mm 02.96 90.
VARI❋LITE® - VLX™ WASH LUMINAIRE USER’S MANUAL Notes 76 1 5 Ap ril 2 010 02 .9 690 .
Vari-Lite 10911 Petal Street Dallas, Texas 75238 USA 1-877-VARI-LITE ❋ 1-214-647-7880 www.vari-lite.com. ©2009 - 2010 Vari-Lite, a Philips group company. All Rights Reserved.
