User`s manual

VARI❋LITE® - VL500™ WASH LUMINAIRE USER’S MANUAL
52 01-March-2006 02.9685.0001 0
ON On Indefinitely Sets Menu Display to stay on until programmed otherwise (Display), turns on a
function, or turns on a menu item.
Pan/Tilt Pan/Tilt Accesses pan and tilt options for DMX function, system configuration, and testing.
Pan Pan Specifies pan function for manual control (Manual) or pan encoder for testing (Test).
PASS Test Pass Indicates that sensor test has passed.
Power Lamp Power Accesses function to turn lamp on or off.
Power Up Lamp Power Up Accesses options for lamp power up: on, off, or after calibration.
Re-cal Recalibrate Recalibrates luminaire.
Reset Def Reset Default Resets default system configuration values.
Reset Hrs Reset Lamp Info Resets lamp hour counter. For use when new lamp is installed.
RunTest Run Test Indicates that a system test is in progress.
SetUp Luminaire Set Up For selecting which color type (Standard or Pastel) and lamp used in luminaire.
Square
Law
Square Law Dimming
Curve
Selects IES standard sine-wave type dimmer curve operation.
Status Status/Error Display Provides the status of the fixture (Fixture) and any error messages.
Swap Swap Swaps pan and tilt functions for special focus requirements such as moving mirror
mechanisms.
Temp Temperature Displays the temperature at the LVS (Low Voltage Supply) or MCB (Main COntrol
Board) in degrees C.
Test System Tests Accesses diagnostic tests for luminaire’s mechanisms.
Tilt Tilt Specifies tilt function for manual control (Manual) or tilt encoder for testing (Te st).
Turbo Turbo Increased lamp drive input to for more lamp output (575W Arc Only)
Version Software Version Displays current software version by date (XX/XX/XX).
Warning
Hrs
Lamp usage hours
(progress bar)
Selects the amount of hours to be displayed by the lamp hour usage progress bar.
Note, this is for quick reference only - for actual lamp hours, see
Lamp Hours.
Yellow Yellow Color System Specifies Yellow color wheel for manual control (Manual) or for testing (Test).
Table 4-2: Menu Function Definitions (Continued)
Display Definition Purpose