User`s manual

MENU SYSTEM : MENU OPERATION
4
02.9685.0001 0 01-March-2006 51
DMX DMX Accesses functions for setting DMX mode or pan/tilt options.
Download Download Downloads program to luminaires.
Enable Enable Enables a function.
Encoder Encoders Accesses pan or tilt encoder for diagnostic testing (Test).
External External Dimmer Sets luminaire to operate with an external dimmer.
Fan Mode Fan Mode Sets the luminaires to operate normally (Auto -fans engage when preset thermal
limits are surpassed) or off (
Off).
Fans Fan Speed Tests luminaire’s fan speed (0 = off to 7 = fastest).
FAIL Test Fail Indicates that sensor test has failed.
Fixt Hrs Fixture Hours Displays total number of hours luminaire has been powered on.
Fixture Fixture Access luminaire specification information such as software version, along with sta-
tus information and download function.
InvPan Invert Pan Reverses pan action for special focus requirements.
InvTilt Invert Tilt Reverses tilt action for special focus requirements.
JATET A JATET A Dimming
Curve
Selects JATET A (Japanese dimming standard) dimmer curve operation.
JATET B JATET B Dimming
Curve
Selects JATET B (Japanese dimming standard) dimmer curve operation.
Lamp
Saver
Lamp Saver Drive
Option
Sets the luminaire to decreased lamp drive to prolong lamp life.
Lamp
Type
Lamp Options For accessing lamp options and configuration (Config) or for Setup to set lamp type.
Lamp
OFF
Lamp Off Configures arc luminaire to strike lamp on manual command.
Lamp ON Lamp On Configures arc luminaire to strike lamp at power up.
Lamp
Hours
Lamp Hours Displays total number of lamp operating hours.
Linear Linear Dimming
Curve
Selects Linear dimmer curve operation.
LumId Luminaire ID Displays unique ID number for the luminaire.
Magenta Magenta Color Sys-
tem
Specifies Magenta color system for manual control (Manual) or for testing (Test).
Manual Manual
Commands
Accesses functions for controlling luminaire mechanisms and timing by entry of an
absolute data value.
Mode A Pan/Tilt Operation Selects increased responsiveness mode to Pan/Tilt DMX commands.
Mode B Pan/Tilt Operation Selects normal responsiveness mode to Pan/Tilt DMX commands.
Move-
ment
Movement Enables and disables pan and tilt movement and auto-correction.
NoProg No Program Indicates that there is no software present in the luminaire.
Normal Normal Sets lamp input drive level to normal drive.
OFF Off Turns off a function.
OK Okay Indicates that luminaire is ready to accept commands.
OK? Okay? Prompt for pressing [Enter] before an action is executed.
Table 4-2: Menu Function Definitions (Continued)
Display Definition Purpose