User`s manual

VARI❋LITE® - VL500™ WASH LUMINAIRE USER’S MANUAL
50 01-March-2006 02.9685.0001 0
Function Definitions
Each menu item is listed in the first column by its display abbreviation. The abbreviations appear in
alphabetical order as opposed to their position in the menu display sequence for easy reference.
Table 4-2: Menu Function Definitions
Display Definition Purpose
10Min
10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
100V 230V IGBT Dimmer
Setting
(DIMMER) setting - for setting/identifying the internal IGBT dimmer to 100V (For use
with the Internal 120V IGBT Dimmer Only)
120v 120V IGBT Dimmer
Setting
(DIMMER) setting - for setting/identifying the internal IGBT dimmer to 120V (For use
with the Internal 120V IGBT Dimmer Only)
230v 230V IGBT Dimmer
Setting
(DIMMER) setting - for setting/identifying the internal IGBT dimmer to 230V (For use
with the Internal 230V IGBT Dimmer Only)
30sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5Min 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
575W
LAMP?
575W Arc Lamp Selects 575W Arc Lamp Option.
700W
LAMP?
700W Arc Lamp Selects 700W Arc Lamp Option.
80V FOR FUTURE USE FOR FUTURE USE - NOT USED
Address Address Accesses functions for setting luminaire starting address in DMX (DMX) controlled
systems.
ALL SEQ All Sequence Performs all tests in sequential order.
Arc 575W Arc Lamp Sets luminaire for 575W or 700W arc lamp (SetUp).
Cal ON On after Calibration Configures arc luminaire so that lamp will strike after calibration procedure is com-
plete.
Chan XX DMX Channel Specifies DMX channel for display of current data value.
ChgLu-
mID
Change the lumi-
naire ID number
Allows access to change or set the luminaire ID number.
CNFIRM
575?
Confirms 575W Arc
Lamp
Questions if 575W arc lamp option is desired.
CNFIRM
700?
Confirms 700W Arc
Lamp
Questions if 700W arc lamp option is desired.
Configure System
Configuration
Accesses functions for setting lamp start up, pan/tilt, Menu Display, changing lumi-
naire ID, and resetting luminaire default values.
Cyan Cyan Color System Specifies Cyan color system for manual control (Manual) or for testing (Test).
Data DMX Data Accesses function for displaying DMX data by channel number and type. Also refer-
ences DMX address.
Diffuser Diffuser Specifies diffuser function for manual control (Manual) or for testing (Test).
Dimmer Dimmer Specifies dimmer function for manual control (Manual) or for testing (Test).
Dimmer
Curves
Dimming Curve
Selection
Specifies dimmer curve selection (Linear, Square Law, JATET A, or JATET B).
Disable Disable Disables a function.
Display Display Illumination Accesses options for Menu Display on and off times.