User`s manual
Table Of Contents
- Vari-Lite VL3500(TM) Series Luminaires
- How To Obtain Warranty Service
- Compliance Notice
- Safety Notice
- Sicherheitshinweise
- Notes de sécurité
- Aviso sobre Seguridad
- Table of Contents
- Introduction
- Description
- Installation
- Operation
- Menu System
- Troubleshooting and Maintenance
- Technical Specifications
VARI❋LITE® - VL3500™ SERIES LUMINAIRE USER’S MANUAL
20 31-July-2004 02.9678.0019 0
To use control channel functions:
Step 1. Select an action to be sent*.
Step 2. Set control channel value for desired action (for example, 84 for reset). Hold value for 3
seconds.
Step 3. Set control channel value to zero. (This must occur without any scaling values. Action will
be voided if other values are detected between action value and zero.)
Note: A numerical keypad is required for sending values. An encoder or fader does not allow for a
quick value change, which is required to effect the control functions.
* = Only this step is required for Pan/Tilt mode.