Service manual

HEAD ASSEMBLY : DIMMER WHEEL ASSEMBLY
02.9678.0018 B 105
3
Dimmer Wheel Assembly
22.9678.0435 Rev D
Refer to
Figure 3-38
Figure 3-38: Dimmer Wheel Assembly
No. Item Qty. UM. Description
1 55.2256.0001 1 EA MAGNET, 2:17 SMCO 2MM X 2MM
1
Coated Side
Glueing Magnet to Dimmer Wheel Assembly
Step 1. Make sure surface is clean and oil free
Step 2. Apply High Temp Copper RTV to magnet as
shown.
Step 3. Place magnet on dimmer wheel assembly as
shown.
Step 4. Apply two fillet beads of NUVASIL RTV on long
edges of magnet to secure in place.
Step 5. Allow to cure in for at least 24 hours at room
temperature. For best results, run through a UV
curing oven twice. .
Copper RTV Bead
Dimmer Wheel Magnet