Service manual

MAINTENANCE PROCEDURES : POWER SUPPLY (LVS) REPLACEMENT
02.9678.0018 A 29
2
Power Supply (LVS) Replacement
VL Part No: 69.3176.0201
Repair Procedure
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At enclosure, remove top cover at power supply side.
Step 3. At LVS, remove wiring.
Step 4. Remove screw closest to pan tube. Loosen two screws at opposite end of wiring.
Step 5. Remove LVS.
Step 6. Install in reverse order. Make sure that no wires get pinched or caught in fan assembly.
Figure 2-13: Power Supply (LVS) Replacement
Remove this Top Cover
Bottom Cover
1)
2)
Head not shown for clarity.
NOTE:
Power Supply (LVS)
Standoff
Fan Assembly