Service manual

VARI❋LITE® - VL3500™ SPOT LUMINAIRE SERVICE MANUAL
28 02.9678.0018 A
Pan EOT Sensor Replacement
VL Part No: 86.7002.0003
Repair Procedure
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. Carefully lay luminaire on its side.
Step 3. At enclosure assembly, remove bottom cover.
Step 4. Remove pan sensor.
Step 5. Install in reverse order. Make sure bottom cover standoffs are seated fully against chassis.
Figure 2-12: Pan EOT Sensor Replacement
Bottom Cover
1)
Head not shown for clarity.
NOTE:
Sensor
Pan Motor
Assembly
2)
Enclosure Bottom View
Standoff