Service manual

MAINTENANCE PROCEDURES : IGNITOR BOARD REPLACEMENT
02.9678.0018 A 25
2
Ignitor Board Replacement
VL Part No: 24.9661.3126
Repair Procedure
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. Remove tilt-side yoke leg cover.
Step 3. Disconnect four lamp wires and four screws securing the ignitor to the mounting plates as
indicated inFigure 2-9 .
Step 4. Remove and replace ignitor board.
Figure 2-9: Ignitor Board Replacement
Ignitor Board
Head and other components
NOTE:
not shown for clarity.
Mounting Plate
Remove Ignitor Board
Mounting Screws