User`s manual

MENU SYSTEM : MENU FUNCTIONS
4
02.9678.0001 A 20-Aug-03 45
Menu System Function Chart
The following is a detailed look at the internal menu system.
Table 4-1: VL3000 Menu System Chart
1st Level 2nd Level 3rd Level 4th Level 5thLevel
Address XXX Address value
Setup Model
Luminaire Type Wash
Spot
Config
Configuration
LAMP
Lamp Options Power Lamp Power ON (default)
OFF
Power UP
Lamp Power-up State Lamp OFF Lamp
Off
Cal ON
Lamp On
After Calibration
Lamp ON
Lamp On
(default)
LampHour Lamp Hours Used XXXX Cumulative #
of Operation Hours
(Not editable)
ResetLmp Reset Lamp OK?
Pan/Tilt
Pan and Tilt Movement Position Recovery Enable Enable
Disable
Disable
Head Mtr Head Motor Movement Head Movement Enable Enable
Disable
Disable
Display
Display Illumination 30 Sec OFF in 30 seconds
5 Min
OFF in 5 minutes
10 Min
OFF in 10 minutes
ON
ON indefinitely
ResetDef
Reset Default OK?
Chg LumID
Change
Luminaire ID
XXXX Value (for future use)
DMX
DMX Data
DATA * Chan XXX
DMX Channel XXXX Value
Pan/Tilt
Pan and Tilt
Options
Swap Swap Pan & Tilt ON
OFF
Inv Pan
Invert Pan ON
OFF
Inv Tilt
Invert Tilt ON
OFF
Fixture Status Status/Error Display Scrolls error messages or
displays
OK
Re-Cal Recalibrate OK?
Lum Id
Luminaire ID XXXXXXXX Luminaire ID
Number
Version
Version MM/DD/YY (Page 1) HH:MM (Page 2)
Fixt Hrs Fixture Hours XXXX # Hours of Use
Download
Download
Software
OK?