Service manual

VARI❋LITE® - VL3000™ & VL3000™Q SERVICE MANUAL

54 02.9678.0010 G

Upper Enclosure Fan Assembly Replacement

VL Part No: 23.9678.0686

VL Part No: 23.9678.0888

Repair/Replacement Procedure

Step 1. Disconnect luminaire AC input cable from power source.

Step 2. At enclosure, remove two 6-32x1/4" LG PPZ screws from display side cover and remove

cover.

Step 3. At power supply, disconnect wiring:

Step 4. Remove one 6-32x3/8" LG PPZ screw.

Step 5. Loosen two 6-32x3/8" LG PPZ screws and slide LVS towards upper enclosure fan to

remove.

Step 6. At fan, remove three 6-32x3/8" PPZ screws and remove fan.

Step 7. Replace by performing steps 2 through 6 in reverse order.

Figure 2-20: VL3000 Upper Enclosure Fan Assembly Replacement

Location Connector

N White AC Wires

L Black AC Wires

V + Red DC Wires

V - Black DC Wires

Some components not shown for clarity.

NOTE:

Display Cover

Fan Assembly