Service manual

VARI❋LITE® - VL3000™ & VL3000™Q SERVICE MANUAL
86 02.9678.0010 G
UV Filter Bulkhead Assembly
22.9678.0639 Rev G (VL3000)
22.9678.0617 Rev A (VL3000Q)
Refer to Figure 3-5
Figure 3-5: UV Filter Bulkhead Assembly
No. Item Qty. UM. Description
1 10.9678.0634 1 EA UV FILTER BULKHEAD
2 10.9678.0648 2 EA CLIP, UV GLASS
3 41.9678.0608 1 EA UV/IR FILTER, 3.00" X 3.00" (VL3000 Only)
41.9678.1160 1 EA UV/IR FILTER, ENHANCED (VL3000Q Only)
4 53.6530.0002 4 EA RIVET, 1/8 OD POP,.063-.125 GRIP, ALUM
1
2
3
4 (x4)
UV Filter Installation
1. Install filter with marks indicating IR coating side of
filter facing up and located outside of circular
cutout in bulkhead.
2. Apply a drop of Loctite 5083 NUVA-SIL Curing
Silicone to each corner of filter. Drop size to
produce 0.25" diameter circle of adhesive when
filter is secured.
3. Position UV filter in between 8 raised locating tabs
on bulkhead and attach using UV glass clips and
rivets as shown.
Be careful not to damage UV filter (chip, scratch,
crack, etc.) during installation.