User`s manual

VARI❋LITE® - VL2500™ SPOT LUMINAIRE USER’S MANUAL
72 05-January-2004 02.9676.0019 A
Rotating Gobo Replacement
WARNING: Remove power from luminaire before performing maintenance.
WARNING: Users of VARI❋LITE luminaires should not install or use metal gobos. The use of metal
gobos in any VARI❋LITE product may damage the luminaire and could void the luminaire’s warranty.
Tools:
Screwdriver, Phillips #2
Hook and Pick tool (or small slotted screwdriver)
Cotton gloves
To remove and replace a rotating gobo:
Step 1. Remove power from luminaire.
Step 2. At removable cover, using #2 Phillips screwdriver, turn two captive screws and remove
cover. (It will remain attached by tether.)
Figure A-8: Replacing a Rotating Gobo
CAUTION: Do not touch gobos with bare fingers. Wear cotton gloves or other covering while
replacing. Clean with glass cleaner and soft cloth if required.
Captive Screws
Removable
Cover
Rotating
Gobo Wheel