User`s manual

VARI❋LITE® - VL2500™ SPOT LUMINAIRE USER’S MANUAL
66 05-January-2004 02.9676.0019 A
Routine Maintenance
Lamp Replacement
WARNING: Remove power from luminaire before performing maintenance.
Tools:
Screwdriver, slotted
Cotton gloves
To replace lamp:
Step 1. Remove power from luminaire.
WARNING: Lamps will be extremely HOT after operation. Allow lamp to cool before replacing.
Step 2. At backcap, using slotted screwdriver (or fingers) turn
captive knob until loose.
Step 3. Slide backcap away from head assembly (it will
remain attached by tether and lamp wires).
Figure A-1: Replacing Lamp
Captive Knob
Backcap Assembly
Head Assembly
Guide Rod
Lamp