User`s manual

VARI❋LITE® - VL2500™ SPOT LUMINAIRE USER’S MANUAL
56 05-January-2004 02.9676.0019 A
Function Definitions
Each menu item is listed in the first column by its display abbreviation. The abbreviations appear in
alphabetical order as opposed to their position in the menu display sequence for easy reference.
Table 4-2: Menu Function Definitions
Display Definition Purpose
10Min
10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
30sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5Min 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address Address Accesses functions for setting luminaire starting address in DMX (DMX) controlled
systems.
ALL SEQ All Sequence Performs all tests in sequential order.
Beam Iris Beam Iris Specifies beam iris function for manual control (Manual) or for testing (Test).
Cal ON On after Calibration Configures arc luminaire so that lamp will strike after calibration procedure is com-
plete.
ChgLu-
mID
Change the lumi-
naire ID number
Allows access to change or set the luminaire ID number.
Config System Configuration Accesses functions for setting lamp start up, pan/tilt, Menu Display, changing lumi-
naire ID, and resetting luminaire default values.
ColorMix Crossfade Color
Wheels
Specifies crossfade color wheels for testing (Test).
ColrWhl Color Wheel Specifies fixed color wheel for testing (Test).
Chan XX DMX Channel Specifies DMX channel for display of current data value.
Cyan Cyan Color Wheel Specifies Cyan color wheel for manual control (Manual) or for testing (Test).
Data DMX Data Accesses function for displaying DMX data by channel number.
Dimmer Dimmer Specifies dimmer mechanism for manual control (Manual) or for testing (Test).
Disable Disable Disables a function.
Display Display Illumination Accesses options for Menu Display on and off times.
DMX DMX Accesses functions for setting DMX Data or pan/tilt options.
Download Download Downloads program to luminaires.
Edge Edge Motor Specifies edge function for manual control (Manual) or for testing (Test).
Enable Enable Enables a function.
Encoder Encoders Accesses pan or tilt encoder for diagnostic testing (Test).
FAIL Test Fail Indicates that sensor test has failed.
FixCol-
Whl
Fixed Color Wheel Specifies fixed color wheel for manual control (Manual).
FixGobo Fixed Gobo Specifies fixed gobo wheel for manual control (Manual) or for testing (Test).
Fixt Hrs Fixture Hours Displays total number of hours luminaire has been powered on.
Fixture Fixture Access luminaire specification information such as software version, along with sta-
tus information and download function.