Service manual

VARI❋LITE® - VL2500™ SPOT LUMINAIRE SERVICE MANUAL
42 29-May-2009 02.9676.0020 B
LVS (Low-Voltage Supply) Power Supply Replacement
Parts:
69.3177.0151
To remove and replace LVS power supply:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At enclosure, remove two 6-32 x 1/4" LG PPZ screws from display side
cover and remove cover.
Step 3. At power supply, disconnect wiring:
Step 4. Remove one 6-32 x 3/8" LG PPZ screw.
Step 5. Loosen two 6-32 x 3/8" LG PPZ screws and slide LVS towards upper
enclosure fan to remove.
Step 6. Replace by performing Steps 2 through 5 in reverse order.
Figure 2-26: Power Supply (LVS) Replacement
Location Connector
N White AC Wires
L Black AC Wires
V + Red DC Wires
V + Red DC Wires
V - Black DC Wires
V - Black DC Wires
Top Cover
Bottom Cover
Power Supply (LVS)
Head not shown for clarity.
NOTE: