Service manual

MAINTENANCE : MAINTENANCE PROCEDURES

02.9676.0020 B 29-May-2009 35

Removing Enclosure Covers (continued)

CAUTION: Be careful not to damage lens during next step.

Step 4. Carefully lay luminaire on its side as shown in Figure 2-20. Make sure that

lens does not come into contact with any surface..

Figure 2-20: Laying Luminaire on Its Side

Step 5. At bottom of enclosure, remove four 1/4-20 × 1/2" socket screws and 1/4"

split lock washers and remove ventilation cover.

Step 6. Return luminaire to upright position.