Service manual

VARI❋LITE® - VL2500™ SPOT LUMINAIRE SERVICE MANUAL
26 29-May-2009 02.9676.0020 B
Edge Motor Assembly Replacement (continued)
CAUTION: If you use pliers instead of 1/4-inch wrench in next step, ensure you
place pliers on standoff on edge motor shaft. Do not hold edge motor shaft with pliers,
or shaft may be damaged.
Step 5. At lens barrel assembly, use 1/4-inch open-ended wrench to hold standoff on
edge motor shaft, and using another 1/4-inch open-ended wrench, remove 4-
40 SS KEPS nut from end of motor shaft. Figure 2-10.
Figure 2-10: Removing Nut From Edge Motor Assembly Shaft
Standoff on Edge Motor Shaft
4-40 SS KEPS Nut
Lens Barrel
Assembly