Service manual

VARI❋LITE® - VL2500™ SPOT LUMINAIRE SERVICE MANUAL
24 29-May-2009 02.9676.0020 B
Rotating Gobo Sensor PCB Replacement (continued)
CAUTION: Always use anti-static precautions when working with PCBs.
Step 4. Remove rotating gobo sensor PCB by removing two 4-40×1/4” PFZ screws.
Figure 2-8.
Figure 2-8: Rotating Gobo Sensor PCB Replacement
Step 5. Install replacement assembly by performing Steps 2 through 4 in reverse
order.
Rotating Gobo
Sensor PCB
4-40×1/4”
PFZ Screws