Service manual

VARI❋LITE® - VL2500™ SPOT LUMINAIRE SERVICE MANUAL
16 29-May-2009 02.9676.0020 B
Maintenance Procedures
Head Assembly
This section provides removal and replacement procedures for components found in
the luminaire head assembly.
Lamp Replacement
Parts:
71.2528.0700
WARNING: Remove power from luminaire before performing maintenance.
To remove and replace lamp:
Step 1. Remove power from luminaire.
WARNING: Lamps will be extremely HOT after operation. Allow enough time for
the lamp to cool before replacing.
Step 2. At backcap, using slotted screwdriver (or fingers) turn captive knob until
loose.
Figure 2-1: Replacing Lamp
Step 3. Slide backcap away from head assembly (it will remain attached by tether
and lamp wires).
Captive Knob
Backcap Assembly
Head Assembly
Guide Rod
Lamp