User`s manual

MENU SYSTEM : CUES AND SEQUENCES

02.9673.0001 D 02-May-03 63

To store a cue:

Step 1. Press [Menu].

Step 2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].

Step 3. Press [Up] / [Down] arrows until Stor appears. Press [Enter]. The number displayed is the

cue number to be stored.

Step 4. Press [Enter] to store cue. (Number will increase by one for next cue to be stored.)

Step 5. Repeat for remaining cues.

To delete a cue:

Step 1. Press [Menu].

Step 2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].

Step 3. Press [Up] / [Down] arrows until Del appears. Press [Enter]. The last cue number stored will

be displayed and only the last cue will be deleted.

Step 4. Press [Enter] to delete cue. (There is no “undo” function.)

To play a cue:

Step 1. Press [Menu].

Step 2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].

Step 3. Press [Up] / [Down] arrows until PCue appears. Press [Enter]. This allows the stored cues

to be selected by using [Up] / [Down] arrows and then played by pressing [Enter]. (If there

are no stored cues, “C --” will be displayed. If there is one or more cues, “C xx” will be

displayed - where xx is the cue number from 1 to 99. Only cues in one luminaire will play.)

To edit or modify a cue:

Step 1. Recall cue to be changed from PCue.

Step 2. Change luminaire data to desired levels using Man (Manual Command) functions.

Step 3. Press [Up] / [Down] arrows until Cue appears. Press [Enter].

Step 4. Press [Up] / [Down] arrows until Mod appears. Press [Enter]. The number displayed is the

same as the selected cue.

Step 5. Press [Enter] and changes will be saved.

To play cues as a sequence:

Step 1. Press [Menu].

Step 2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].

Step 3. Press [Up] / [Down] arrows until PSEQ appears. Press [Enter] and the sequence will play.

The active cue will be shown in the display. [Enter] to start, [Menu] to stop.