User`s manual

MENU SYSTEM : OPERATION
4
02.9673.0001 D 02-May-03 57
Function Definitions
Each menu item is listed in the first column by its display abbreviation. The abbreviations appear in
alphabetical order as opposed to their position in the menu display sequence for easy reference.
Table 4-2: Menu Fuction Definitions
Display Definition Purpose
8 Standard 8-bit Configures luminaire for operation in standard DMX 8-bit mode.
16 Standard 16-bit Configures luminaire for operation in standard DMX 16-bit mode.
10M 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
30s 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5M 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Addr Address Accesses functions for setting luminaire starting address in either Virtuoso
(VIRT) or DMX (DMX) controlled systems.
ALL All Motors Tests all internal motors.
Auto Auto Detect or
Auto Playback
Automatically detects required Menu Display orientation when selected
(DDir) or initiates automatic playback of a cue sequence at power-up
(CUE).
BTim Beam Time Accepts timing value for beam time.
C ON On after Calibra-
tion
Configures arc luminaire so that lamp will strike after calibration procedure
is complete.
Cal Recalibrate Recalibrates luminaire.
CFG System
Configuration
Accesses functions for setting lamp start up, pan/tilt, and Menu Display
configurations. Also accesses lamp information such as number of strikes,
and hours used, along with their respective reset function.
CTim Color Time Sets color time.
Cue Cue Processing Accesses cue store, modify, delete, and playback commands.
Cwhl Color Wheel Specifies Color wheel for testing.
cXXX DMX Channel Specifies DMX channel for display of current data value.
DATA DMX Data Accesses function for displaying DMX data by channel number.
DDir Display Orientation Accesses option to orient Menu display for reading correctly in either hang-
ing or floor mounting installations.
Del Delete Cue Deletes cues by number. Cue number deleted is dependent on last cue ID
in cue list since this field is not editable.
Dimm Dimmer Specifies dimmer mechanism for manual control (Man) or tests dimmer/
strobe functions (Test).
Dis Disable Disables a function.
DISP Display Test Tests all 14 segments in the Display.
DisP Display Illumina-
tion
Accesses options for Menu Display on and off times.