User`s manual

TROUBLESHOOTING AND MAINTENANCE
A
02.9673.0001 D 02-May-03 85
Color Filter Replacement
WARNING: Remove power from luminaire before performing maintenance.
Tools:
Screwdriver, Phillips #2
Cotton gloves
To remove and replace a color filter:
Step 1. Remove power from luminaire.
Step 2. At removable cover, using #2 Phillips screwdriver, turn two captive screws one-quarter turn
and remove cover. (It will remain attached by tether and lamp wires.)
Figure A-2: Replacing a Color Filter
CAUTION: Do not touch color filters with bare fingers. Wear cotton gloves or other covering while
replacing. Clean with glass cleaner and soft cloth if required.
Captive Screws
Removable
Cover
Color/Gobo/Link
Iris Bulkhead
Color Wheel
Bulkhead Captive Screw
Finger Access
Cutout
(behind plate)