User`s manual

VARI
❋
LITE® - VL2000™ SPOT LUMINAIRE USER’S MANUAL
82 02-May-03 02.9673.0001 D
TILT
NO
SENS
Tilt Sensor Not Found EOT flag attached to large pulley is not engaging the
EOT sensor
- Ensure flag is attached to the large pulley
- Ensure that flag passes through the sensor at a
depth sufficient to engage the sensor beam
Tilt belt disconnected, extremely loose or not installed
properly
- Properly install belt between tilt motor and large
pulley
TILT
SENS
ACTV
Tilt Sensor Always Active Main board pan/tilt connector (J9) disconnected
- Connect main board pan/tilt connector (J9)
End-of-travel sensor connector (J2) disconnected
- Connect end-of-travel sensor connector (J2)
WAIT Retrieving Current Status System displays wait while getting status.
WRNG
SW
PROG
Wrong Software Program Software installed does not match luminaire type
- Download the correct software for the luminaire
Table A-2: Troubleshooting Guide (Continued)
Error Display Description Possible Cause and Remedy