User`s manual

MENU SYSTEM : MENU FUNCTIONS
4
02.9665.0001 0 15 February 2011 53
Inv Tilt Invert Tilt Reverses tilt action for special focus requirements.
Lamp Lamp Accesses lamp power up options and information (Config).
Lamp 1 Lamp Specifies test lamp operation (Test).
Lamp 2 Lamp Specifies test lamp operation (Test). Inserts magenta to 30%.
Lamp OFF Lamp is Off Configures arc luminaire so that lamp will not strike upon power up.
Lamp ON Lamp is On Configures arc luminaire so that lamp will strike upon power up.
LampHour Lamp Hours Displays total number of lamp operating hours.
LampType Lamp Type Accesses menu item for configuring luminaire for arc or incandescent source.
Lum Id Luminaire ID Displays unique luminaire ID number.
Magenta Magenta Specifies manual control of Magenta (Manual) or test Magenta functions (Test).
Manual Manual
Commands
Accesses functions for controlling luminaire mechanisms and timing by entry of
an absolute data value.
Model Model Displays model number of luminaire. For example, VL1100TS.
Movement Movement Enables and disables pan and tilt movement and auto-correction.
No No Specifies that the luminaire does not contain the shutter accessory.
OFF Off Turns off a function.
OK Okay Calibration has completed and no errors have occurred.
OK? Okay? Prompt for pressing [Enter] before an action is executed.
ON On Indefinitely Sets Menu Display to stay on until programmed otherwise (Display) or turns on a
function.
Pan Pan Specifies pan function for manual control (Manual) or pan encoder for testing
(Test).
Pan/Tilt Pan/Tilt Accesses pan and tilt options for DMX function, system configuration, and test-
ing.
PASS Test Pass Indicates that sensor test has passed.
Power Lamp Power Accesses function to turn lamp on or off.
PROG Programming Currently programming the new version of software.
Re-Cal Recalibrate Currently executing calibration or recalibrates luminaire.
ResetDef Reset Default Resets default system configuration values.
ResetHrs Reset Lamp Info Resets lamp hour and lamp strike counters. For use when new lamp is installed.
Rot Gobo Rotating Gobo Specifies rotating gobo for manual control (Manual) or gobo select EOT sensor
for testing (Test).
Rot Shut Rotating Shutter Specifies shutter mechanism rotating function for manual control
(Manual) or for testing (Test).
RUN TEST Run-Test Indicates that a system mechanism test is in progress.
Sensor
Sensors Accesses sensor choices for diagnostic testing.
Setup Setup Accesses lamp type and shutter operation settings.
Shutter Shutter Specifies shutter mechanism for testing.
Shutter? Shutter Accesses menu item for configuring luminaire for shutter operation.
Status Status/Error Dis-
play
Allows scrolling through error list or displays OK if no errors.
STST Sensor Test Indicates that a system sensor test is in progress.
Test System Tests Accesses diagnostic tests for internal mechanisms.
Tilt Tilt Specifies tilt function for manual control (Manual) or tilt encoder for testing
(Test).
Display Definition Purpose