User`s manual

VARI❋LITE - VL1100CD ERS LUMINAIRE USER’S MANUAL
52 15 February 2011 02.9665.0001 0
Menu Function Definitions
For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Display Definition Purpose
10 Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
30 Sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5 Min 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address DMX Address Accesses function for setting luminaire DMX starting address.
ALL All Motors Tests all internal motors.
Amber Amber Specifies Amber for manual control (Manual) or test Amber functions (Test).
Arc Arc Specifies luminaire as having an arc lamp source.
Blue Blue Specifies Blue for manual control (Manual) or tests Blue functions (Test).
Cal ON Calibration On Configures arc luminaire so that lamp will strike after calibration procedure is
complete.
CD VL1100CD Model Sets menu option to VL1100CD luminaire (VL1100CD models only)
Chan XXX DMX Channel Specifies DMX channel for display of current data value.
Clear Clear Clears stored parameters and re-calibrates luminaire.
ColorMix Color Mixer Tests color mixing mechanism.
Config System
Configuration
Accesses functions for setting lamp, pan/tilt, and Menu Display options. Also
accesses lamp information such as number of strikes, and hours used, along
with their respective reset function.
Data DMX Data Accesses function for displaying DMX data by channel number.
Diffusn Diffusion Specifies manual control of Diffusion (Manual) or tests Diffusion functions (Test).
Dimmer Dimmer Specifies dimmer mechanism for manual control (Manual) or tests dimmer/
strobe functions (Test).
Disable Disable Disables a function.
Display Display Illumina-
tion
Accesses options for Menu Display on and off times.
DMX DMX Sets starting address for DMX systems.
Edge Edge Function Specifies edge function for manual control (Manual) or for testing (Test).
Enable Enable Enables a function.
Encoder Encoders Accesses encoder choices for diagnostic testing.
FAIL Test Fail Indicates that sensor test has failed.
Fixt Hrs Fixture Hours Displays total number of hours luminaire has been powered on.
Fixture Fixture Access luminaire specification information such as model, serial number, soft-
ware version, along with status information.
Frame 1A -
Frame 4B
Frame Side Specifies shutter frames 1A, 1B, 2A, 2B, 3A, 3B, 4A or 4B for manual control
depending on which one is selected at the Manual Commands menu.
GoboIndx Gobo Index Specifies gobo index EOT sensor for testing.
Incand
Incandescent Specifies luminaire as having an incandescent lamp source.
Index Gobo Index Specifies rotating gobo index for manual control.
Inv Pan Invert Pan Reverses pan action for special focus requirements.