User`s manual

VARI❋LITE - VL1100CD ERS LUMINAIRE USER’S MANUAL
18 15 February 2011 02.9665.0001 0
To hang luminaire in truss:
Step 1. Lift luminaire into mounting position.
Step 2. Secure in place with truss hooks. Ensure truss hook hardware that locks hook in place (e.g.
wing bolt) is properly tightened and that luminaire is fully supported.
Step 3. Attach safety cable (sold separately) as follows:
a. Connect end of cable to mounting pin at one side of pan tube base.
b. Loop at least once around pipe and attach other end at second mounting pin.
Step 4. Connect power and data cables according to procedure given in “Connecting Data and
Power” on page 19.
Figure 2-6: Example VL1100CD Luminaire Truss Hanging Installation
26"
(66cm)
26.5"
(67.3cm)
35.5"
(90.2cm)
17.5"
(44.5cm)
Safety Cable:
Recommended for all hanging installations
or as may be required by local codes.
Safety cable securing
points on fixture.