User`s manual

VARI❋LITE - VL1100CD ERS LUMINAIRE USER’S MANUAL
16 15 February 2011 02.9665.0001 0
Accessory Frame Holder
An accessory frame holder is provided for the addition of a top hat or gel frame with silks, frosts or
color correction if required. The frame holder is designed to fit a standard 7.5-inch gel frame or top hat.
To remove and replace frame or top hat:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At front lens, press upward on accessory frame latch and turn to open.
Step 3. Remove frame/top hat, if any (Figure 2-4).
Step 4. Install frame/top hat and close latch.
Figure 2-4: Installing a Frame or Top Hat
Gel, Silk, or
Accessory Frame
Head Assembly
Latch
Press Up
and Turn
Frost
The accessory frame is not a Vari-Lite accessory.
NOTE: