User`s manual

MENU SYSTEM : MENU OPERATION
4
02.9663.0001 G 05-Oct-2007 57
Menu Default State
The menu display’s default state during normal operation is to display the address. After 10 seconds of
inactivity at the display, it will change to this default state.
After 5 minutes of inactivity, the menu display will switch to its off state.
Menu Shortcuts
A few button combinations are provided as shortcuts for frequently used menu functions. These are as
follows:
• Lamp On - Press and hold [Up], then press [Enter]. (Arc models only.)
• Lamp Off - Press and hold [Down], then press [Enter]. (Arc models only.)
• Recalibrate - Press and hold [Up], then press [Menu].
• Interrupt Calibration - Press [Menu] at Power up. (See “Program Starting Address Without
Calibrating” on page 32 for more information.)